TMW OFF-ROAD

Testing the NEW Liquid silver XP 4 900 at Glamis

2012-01-10T10:38:00.000-08:00

2012-01-10T10:31:00.001-08:00

Testing out the new Polaris RZR XP 4 Liquid Silver edition through the whoops at Olds in Glamis 70mph

This message has been sent using the picture and Video service from Verizon Wireless!

To learn how you can snap pictures and capture videos with your wireless phone visit www.verizonwireless.com/picture.

Note: To play video messages sent to email, Quicktime@ 6.5 or higher is required.

TMW Joins Destination Polaris Project X

2011-12-27T21:01:00.000-08:00

Set your DVR's! TMW Off-Road joins Destination Polaris. Check us out on their "Project X" segment of the show. Dec. 26, Jan. 2, 9, 16, 23 and 30. The show will repeat again at the end of March and all of April.
Air times are Monday 4:30 pm and 9:30 pm and Tues at 1:00 am. (All times are Eastern.) (Its on the outdoor channel On Cox cable its channel 161)

Its Finally here the all new Polaris RZR XP 4 900

2011-12-20T17:03:00.000-08:00

We are so glad Polaris decided to add the XP4 to the line up. Since we saw the 900 XP last January we have been awaiting the 4 seat version. That is why we were stretching the 900 XP and making XP4's for the last year..

Now we can focus on what we do best making the best aftermarket products on the market..

Polaris has done an amazing job take a look at some of the features!!

RZR XP™ 4 900 - Xtreme Performance for 4
The 2012 RZR XP™ 4 900 is the newest member of the RZR family. It delivers the ultimate combination of power, suspension and agility to dominate in the dunes, desert and wide open spaces. With 88 HP, 3-Link Trailing Arm, 12.5” of ground clearance and Premium Walker Evans shocks it delivers razor-sharp performance and agility for 4 like nothing else can.

Top Features:
PROSTAR™ 900 ENGINE
Specifically built for extreme performance Side x Sides, the Polaris ProStar™ 900 engine delivers 88 HP, the highest in the industry. It features Dual Overhead Cams (DOHC), 4 large valves per cylinder for high-RPM power and dual throttle bodies located close to the intake valves. The ProStar™ 900 delivers fast throttle response, groundbreaking power and revolutionary acceleration. There’s plenty of power to carry 4 people even in sand and other power-robbing terrain.

3-LINK TRAILING ARM IRS
With the 3-Link Trailing Arm IRS to create the smoothest, most precise ride in the industry. It’s a proven, durable design, with no excess parts to add weight. It features two rear control arms and a far forward-connecting trailing arm, resulting in a strong yet lightweight system. The industry-first standard 2.5” body Premium Walker Evans™ rear shocks provide the extra volume needed to dissipate heat and provide an incredible 14” of suspension travel to soak up the bumps and whoops.

FASTEST ACCELERATING
Without a doubt, it’s the fastest accelerating 4-seat Side x Side available, and fast acceleration equals big smiles and a fun ride for 4. This revolutionary acceleration is made possible by the powerful 88 HP engine and low total vehicle weight -- creating an incredible power-to-weight ratio -- plus massive power to the ground.

LIGHT, COMPACT TRANSMISSION
The transmission is specifically designed to optimize power from the Polaris ProStar™900 engine. The innovative, lightweight design features a helical cut final drive with optimized gear geometry to maximize efficiency, even at high torque-loads. That means huge power that is efficiently delivered to the ground with minimal driveline noise.

LONG WHEELBASE
The wheelbase of the 4-seat RZR XP 4 900 is has been lengthened to accommodate the extra seats. That extra wheelbase works to smooth out the bumps and whoops for the absolute best off-road ride for 4. And because it’s paired with the 3-link Trailing Arms IRS, you and your passengers get a fast, flat ride that lets you ride longer and maximize the fun.

HIGH GROUND CLEARANCE
The 3-Link Trailing Arm IRS and Premium Walker Evans™ shocks work together to create an astounding 12.5” of ground clearance. Whether you’re riding solo or in a group of 4, you ride with greater confidence, clearing rocks, bumps, ruts and obstacles that other off-road vehicles cannot.

LOW CENTER OF GRAVITY
RZR XP 4 900 delivers a low center of gravity. The engine-behind-the-seat design keeps the engine weight and the driver low and centralized in the chassis. This results in the most agile, responsive ride by providing the ultimate ride over rough terrain and unmatched cornering.

ON-DEMAND TRUE ALL-WHEEL DRIVE
On-Demand True AWD gives you the ultimate in traction, gripping the terrain to take you and your passengers through the corners, whoops and loose sand. It’s the fastest responding on-demand system, automatically engaging and sending power to all 4 wheels when you need more forward traction, and reverting back to 2WD when you don’t.

ULTIMATE CORNERING CONTROL
To provide precise cornering, the suspension’s radius rods extend deep into the wheel hubs and feature an uneven link geometry that optimizes camber. This allows the tires to lean into the corner through the suspension travel, and plant more tire surface on the ground for maximum control.

Industry first standard 2.5” body Premium Walker Evans™ rear shocks
12.5” of ground clearance
Dual bore brake calipers on all 4 wheels

The RZR XP 4 900 comes in two models

Red base model and Limited Edition Liquid silver LE
http://cdn.polarisindustries.com/ORV/MY2012/specifications/thumbs/rgr_rzr_xp_4_900_lqdslvr.jpg
Limited Edition options include:

SAME RAZOR SHARP PERFORMANCE FEATURES AS THE BASE MODEL PLUS:
Electronic Power Steering
Maxxis Bighorn tires on 12" black Crusher aluminum rims
Custom cut & sew Black and White seats with Red RZR emblem
Liquid silver painted dash with gloss black hood
Color matched front and rear suspension springs
White Lightining painted control arms, trailing arms, and radius rods
Custom graphics package

For more info Visit the Polaris website:

Intimidator Low Profile cage

2011-05-28T20:17:00.000-07:00

Intimidator Low profile

2011-05-27T08:39:00.000-07:00

Here are some pics of our Intimidator Low profile cage for the Polaris RZR & Polaris RZR XP 900..

This cage is 6" lower than stock.

We also still make our standard cage that is 4" lower than stock for taller passengers..

TMW's NEW 900 XP

2011-03-24T16:10:00.000-07:00

We wanted to show you side by side what our 900 XP Looks like, In comparison to a stock 900 XP.

This 900 has our roll cage hard top Front Prerunner Bumper, White painted body with Graphics.

OMF Bead lock wheels, Sandblaster 26" paddle tires rear, Smoothie front, Vision X light bar, Simpson harnesses, Axia Alloys rear view mirror

We are still waiting for the turbo charger from MCX , Radios from Rugged and The seats from Triple X.

Then this Build will be complete.

NEW project : RZR 900 XP 4 seater

2011-03-16T10:23:00.000-07:00

Check out our lastest project

TMW RZR 900 XP-4

WHY?

Because We just could'nt wait for Polaris to come out with it.

Radius Cage for RZR 900 XP

2011-02-24T13:13:00.000-08:00

Here is a sneak peak of the RZR 900 XP radius cage we are building.

TMW's NEW RZR 900 XP

2011-01-26T11:03:00.000-08:00

Well we Finnally got our New RZR 900 XP in yesterday.

We are starting to build parts for it.

we will keep you posted.

This machine is amazing we got it on the street and it Gets to 73MPH Quick.

We cant wait to get it in the sand.

Ladies Kawasaki Teryx

2011-01-21T11:56:00.000-08:00

Check this cool Teryx we built for my friends wife..

NEW Polaris RZR-XP 900

2011-01-01T14:38:00.001-08:00

Well we had a feeling that Polaris wouldn't Let CanAm get to far out there with the commander.

So it looks like they did it again more power and performance than the Commander but a way nicer Chassis.

Lower center of gravity, Long travel suspension with 14" Wheel travel, New 875cc 4-Stroke DOHC Twin Cylinder motor with 89HP,Fox podium adjustable shocks,and a top speed at 75MPH.

I think CanAm owners will have buyers remorse when they get spanked by the new RZR-XP

For More Info visit: http://www.polarisindustries.com/en-us/ATV-RANGER/2011/Side-By-Side-Vehicles/RANGER-RZR-XP-900/Pages/Overview.aspx

LSR +4" MTS CanAm Comander suspension kit.

2010-12-23T06:38:00.001-08:00

Here is a quick look at the first drawing for the new

LSR +4" MTS CanAm Comander suspension kit.

This mid travel kit will the first of two kits.

Hoppfully this spring we will see the XTR long travels kits.

RZR 170 Build

2010-12-13T17:40:00.001-08:00

New RZR 170 Build

2010-12-13T17:39:00.001-08:00

Check out this polaris rzr 170 we built for our friends in the UAE.

Feartures:
TMW Cage with hard top.
TMW prerunner bumper.
Twisted stitch seats.
Simpson harnesses.
Muzzy exhaust.
Vent air intake.
OMF bealock wheels.
Skat track straight paddles.
TMW fab side panels.
Orlando custom paint.

WHY WE DO WHAT WE DO

2010-10-11T23:15:00.001-07:00

I have been influenced by many people in my life, but the person who has made the biggest impact in my life was my father Elton Ross Tyler.
He instilled in me a love for God, country, creating things with my hands, welding and playing In the Sand Dunes.
I hope I can pass on to my children a small portion of what he has given me.
Here is a picture of my father in Jan. 1985 in the dunes at Gordon's Well.
Thank You, Dad!

Go Green

2010-09-22T18:38:00.000-07:00

I was driving down the road today when I saw this truck.

This sticker says it all..

Monster RZR 170

2010-09-21T19:27:00.000-07:00

2010 Kawasaki Teryx

2010-09-20T14:56:00.000-07:00

Here is our new 2010 Kawasaki Teryx

Features Include:

LoneStar Racing XTR +5" Long Travel suspension

TMW Radius Family Cage (w/ Hard Top and Cooler Rack)

TripleX Custom Duo Sport Seat Package

Simpson 4 Point harnesses

ITP T-7 Beadlocks With Kenda SBS-HD tires

Vision X Lighting with over 7200 Lumens of pure LED powered light

Interior dome lights

Muzzy Dual Exhaust , MSD FI, Air Raid Intake.

SELLING PRICE $22,000

Doug Tyler

www.TMWOFFROAD.com
www.TYCOTRAILERS.com
Office: 480 969 9261
Fax: 480 969 1370

RZR-4 Robby Gordon 2010

2010-09-20T14:39:00.000-07:00

This is a 2010 RZR-4 that we built for our friend Scott.

On this RZR-4 we build our new EX4 side panels.

The panels are low enough for easy entry but still offer leg protection. All with out having a door that is loose and rattling and opening all the time.

Check out our new Turbo RZR-4

2010-09-20T14:26:00.000-07:00

Take a look at the new RZR-4 we built for the Sand Sport Super Show.

Sand Sports Super Show

2010-09-18T19:14:00.000-07:00

Check out our booth at the 12th annual Sand Sport Super Show!!!

Check Out The New TMW infomercial

2010-06-28T12:34:00.000-07:00

Unisteer

2009-12-09T14:25:00.000-08:00

Are you sick of fighting your UTV's steering through rough terrain? Getting man handled by your rides steering wheel might just strip you of your man card!
TMW OFFROAD is proud to announce they are carrying the full line of Unisteer
products! Unisteer electric power steering units are the best on the market!
The good guys over at Unisteer have spent years developing and perfecting the perfect solution for sloppy stock UTV steering.

Electra-Steer assist steering is the newest technology being used by the major automotive manufactures to replace hydraulic power steering and is now available to UTV enthusiasts! These units consist of an electric column and power control module that utilizes state of the art electronics. The result is significant reduction of manual steering effort!

Electra-Steer is fast and easy to install! All kits include everything needed to simply bolt the unit onto the existing equipment. Basic hand tools are all that is typically needed. Electra-Steer is then connected to your 12-volt power source and you are ready to hit the trail!

Unisteer Electra-Steer Units are available for the Yamaha Rhino, Kawasaki Teryx, Arctic Cat Prowler, Polaris Ranger, & Polaris Ranger RZR!

Dalton Industries NEW Adjustable Clutch for the Polaris RZR & RZR-S

2009-10-24T19:45:00.000-07:00

We have been trying for years to get the best performance out of the Polaris RZR. One of the biggest problems we have had is getting the perfect clutch set up. Then once you finally get the perfect clutch installed in your RZR and you decide to change the pipe or air filter, you have to start all over with a whole new clutch.

Well, not anymore with the new Dalton Adjustable Clutch System! You can buy one kit and be confident that it will work perfectly for you. Then, when you make changes to your RZR, you simply adjust your clutch accordingly. NO MORE GUESSING! GET IT RIGHT THE FIRST TIME, EVERY TIME!

One clutch kit that can be set up for different terrain, tires, sizes and elevation means accurate clutch tuning for each situation. There will be improved acceleration without losing top speed.

This kit includes Dalton's patented "Quick Adjust" flyweight system that allows you to add or subtract weight from the flyweights without even removing them from the drive clutch. Instead of using generic flyweights or designs from OEM snowmobiles or regular ATV models, extensive testing led to the development of a new custom-base flyweight specific Polaris RZR & RZR-S. The new "Quick Adjust" RZR flyweight in this kit has a different curvature, and location of mass which allows superior belt grip and RPM control .
You RZR can now reach it's full ponential.

* Ultimate RPM control (can be easily adjusted for modifications)
* Stock tires or over-sized
* Altitude adjustable
* New custom RZR specific flyweight profile
* Set up manual includes set up instructions for above applications

Buy Dalton Industries RZR Clutch

Maier Plastics

2009-10-21T22:36:00.000-07:00

TMW OFFROAD has now added Maier custom UTV plastics for the
Yamaha Rhino,
Kawasaki Teryx,
Polaris RZR,
So weather you wrecked your rhino and need a new body or are just looking to get a new look Maier makes it easy with there huge selection and great price.

Maier Plastics for the Yamaha Rhino,
Maier Plastics for the Kawasaki Teryx,
Maier Plastics for the Polaris RZR,

Click Here for a list of all Maier products

www.RZRRIDERS.com

2009-10-20T22:27:00.000-07:00

TMW OFFROAD is proud to be a sponser in the the NEW RZR forum.
Take a minute to check it out.

www.RZRRIDERS.com

2009-10-20T21:52:00.000-07:00

We are proud to announce that TMW OFF-ROAD has been accepted into the 2009 Battle of the Builders. We are building an amazing new Kawasaki Teryx for the competition. We will post pics of this vehicle when it's finished.
http://www.sidexsideaction.com/kawasakibob/

View Last Years Battle Of The Builders Results.

Gannon Detailing

2009-10-20T20:56:00.000-07:00

One of the biggest problems with the UTV's is that they get dirty fast.
We have quite a few UTV's, and it takes a lot to clean each one the right way.
That was until we found Gannon Detailing. They do full custom detailing on any vehicle. So that means they will get the toothbrush out and clean every inch of your UTV, SUV, boat or truck. They will also just do basic washes. Steve Gannon (Owner) has years of experience in the detailing field. If you have a weird spot on your truck seat, he has the solution to remove it safely. These guys prep all of our vehicles for the different shows and competitions. They keep us looking good!! Give them a call at (480) 233-5922.

Predator X-18 Intimidator

2009-09-12T22:37:00.000-07:00

We are proud to announce that we will be adding Predator's X-18 Intimidator to our vehicle line up. We have become the only dealer in the Phoenix Metro Area.

The cars are in stock now!!

Features:
CARB and EPA Approved Green Sticker / MSO Street Legal in Some States, See Your Local DMV

Engine Performance:
• GM / Chevrolet Ecotec, Built by CBM Motorsports, Forged Pistons, 90-Day Warranty
• 170HP 2.2 Liter Engine @ 155 ft. lbs. of Torque
• Exhaust: Stainless Steel Twin Tip Muffler with Stainless Steel Header Manifold, Certified Catalytic Converter
• Stainless Steel Intake Manifold
• Cooling: Large Capacity Radiator, Triple 9” Fans (Independently Relayed and Fused)
• Air Filter: K&N Washable Pleated Mesh
• MSD Ignition: Mefi 4 Computer & Wiring Harness
• Power Steering Assist
• Alternator 120 Amp

Transmission:
• Automatic CVT
• 8 to 1 (2WD) .091 Differential, F-N-R Transmission
• Axles: Chromoly with 930 CV Joints
• Automatic Clutch: Team Industries Driven Clutch and Comet Drive Clutch, Kevlar Belt
• Shifter: Billet Machined Aluminum F-N-R

Chassis Construction:
• Chassis Construction: 1-1/2” Chromoly .083 to .130 depending on Location, Mig Welded
• Suspension Rear: Chromoly, 4130 Swing Arms
• Suspension Front: Chromoly Double A-Arm, Tig and Mig Welded
• Spindles Front: Chromoly, Mig/Tig Welded
• Full Skid Plate
• Frame: Powder Coated
• Gel Coated Fiberglass Body, 7 Standard Colors: Red, Black, White, Yellow, Green, Blue and Orange

Performance and Fuel Capacity:
• Keyed High Speed Ignition Approx. 70 MPH
• Keyed Low Speed Ignition Approx. 35 MPH
• Fuel Capacity: 16.0 Gallons

Brakes, Suspension, Tires & Wheels:
• Travel and Suspension: 20” Front and 18” Rear
• Chromoly Heims 7/8” and 3/4”
• Shocks Front: Vogtland Off-Road 10” x 2.0” x 7/8”, Piggy Back Reservoir, Nitrogen Filled
• Shocks Rear: Vogtland Off-Road 13” x 2.0” x 7/8”, Piggy Back Reservoir, Nitrogen Filled
• Front Hubs: Billet 7075 Machined
• Rear Hubs: S10 Chromoly Micro Stub and Bearing
• Brakes, Front and Rear Independent: 4 Calipers, 2 - 4 Piston with 9” Drilled Rotors Front, 2- 4 piston with 11-1/2” Drilled Rotors Rear
• Dual Brake Reservoir with F-to-R Adjustable Bias
• Emergency Brake
• All Terrain Tires Front and Rear
• 5 Bolt Cast Wheels

Safety and Communication:
• Full Suspension Seats, Fully Adjustable, Heated, Low and High settings
• Simpson 5-Point Safety Harnesses
• Simpson Window Nets
• Simpson Limit Straps

Predator Motor Corporation

Sand Sports Super Show

2009-09-12T22:09:00.000-07:00

TMW OFF-ROAD is proud to announce that we will be traveling to the 2009 Sand Sports Super Show!
Please come and visit us. We will be in building #16.

Show Dates:
September 18, 19 & 20 2009

Orange County Fair & Event Center
Costa Mesa, California

Friday—5pm to 10pm
Saturday—9am to 7pm
Sunday—9am to 4pm

Sand Sports Super Show

2009 UTV Summer Fest

2009-06-23T13:00:00.000-07:00

Come see our both at the 2009 U.T.V Summerfest beginning June 26th through June 28th 2009. Located in Phoenix, AZ inside the Home and Garden Expo building, Checkout all the latest UTV models, view a varity of UTV Parts and Accessories for the Yamaha Rhino, Kawasaki Teryx, Polaris RZR, Polaris Ranger, Arctic Cat Prowler and other side by sides vehicles. Times will run Friday through Saturday 9am -6pm and Sunday from 11am-5pm. The UTV Summerfest includes FREE parking and FREE admission!

UTV Summerfest Features:

* Show N’ Shine Contest
* Manufacturers Reps will be on site
* Vendors Row
* New UTV Model Display
* Great food n’ beverages on site
* Future event information
* Meet all the valleys UTV Specialist
* Much More!!

2009-05-15T15:02:00.000-07:00

Sick and tired of driving your UTV in silence?? Or maybe your tired of listening to your significant other screaming in your ear" Slow down...slow down....what are you doing....honey stop...stop!! Well, now you can drown out even the most annoying of voices with an easy to install speaker pod system for your UTV!!

TMW OFFROAD now carries a complete supply of all SSV Works speaker pods! SSV Works custom molded speaker pods bolt into the upper foot well away from your feet! They are 100% fiberglass for the best sound quality and bass response! They are finished in a black texture coat to match Yamaha textures and can be custom painted to match your color scheme! They also includes stainless mounting hardware and step-by-step installation instructions!

I am telling you from experience that there is no cleaner way to mount a speaker system! There are speaker pods for the Yamaha Rhino, Polaris Ranger , Polaris RZR , Kawasaki Teryx , and the Arctic Cat Prowler! You can also choose from 6.5" or 6x9" speakers

RZR Speaker Pods
Rhino Speaker Pods
Ranger Speaker Pods
Teryx Speaker Pods
Prowler Speaker Pods

2009-05-05T10:53:00.000-07:00

NEW PRODUCT:

Vision X introduces the all new Solo s1100 in the Solstice Series of LED off road lamps. Equipped with Vision’s brand new 10 watt LED technology, with each 10 watt Solo producing 800 lumens making them the brightest LED off road lamp on the market in only a 2” x 2” square housing. Not only are they the brightest, they are the most efficient with the s1100 drawing only 0.75 amps due to their advanced electronic drivers which are also responsible for their 50,000 hour life span and variable 9-60 Volt DC input. The Solstice Solo’s main feature is the 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod or other various available mounting hardware for flat, tube or even helmet mount making it the only modular light with the ability to make any shape or length with the available spot, euro and flood beam patterns mixed throughout your custom configuration.

Other key features are as follows; rugged die-cast aluminum housing provides optimum durability and heat dissipation. The Solstice Solo series features an IP68 ingress protection rated housing making them impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The Solstice Solo series has been subjected to a 14Grms vibration test to ensure their performance in high impact conditions. Built to last, this Vision X series features a lifetime warranty.

NEW RELEASE: Complete line of products for the prowler 1000cc

2009-04-21T19:48:00.000-07:00

Check out or new line of products for the Artic Cat Prowler 1000cc & 750cc.
We developed The 4XR Radius Family Cage to give the Prowler a new look.$850.00

Check out the newProwler side panels $399.00

ArticCat Prowler PreRunner Bumper $395.00

ArticCat Prowler Led Brake light $199.00

2009-04-20T21:42:00.000-07:00

NEW RELEASE: We here at TMW OFF-ROAD are proud to announce the release of the EX2 Side Panels for the Polaris RZR. These new side panels offer a new, cleaner look than most RZR side panels on the market today. We spent a lot of time with the RZR trying keep with the factory lines. The EX2 side panels make it easy to carry your paint scheme from the front of the Razor to the rear, helping you tie it all together. The EX2 RZR side panels has a rigid frame made from .095 Mild Steel. The frame of the side panel will hook to the frame of any RZR with a stock cage or aftermarket cage. The panels are made of .065 aluminum that is cut, bead-rolled and hand-formed to fit the RZR perfect. The EX2 side panels eliminate all rattling that you get when using a side door the opens and closes. We now offer a color matched painted side panel for the Polaris RZR-S. The price for the raw side panels is $799.00 (per set). The color matched RZR-S side panels are $1299.00 (per set).
SIDE PANELS CUSTOM PAINTED

RZR-S COLOR MATCH

SIDE PANELS RAW

RZR-S COLOR MATCH

GET YOURS TODAY!www.TMWOFFROAD.com

Yamaha Recall

2009-04-02T10:37:00.000-07:00

I just received the news that Yamaha is requesting that all Rhinos be recalled for safety updates!! SEE BELOW

Yamaha Motor Corp. Offers Free Repair For 450, 660, and 700 Model Rhino Vehicles

CPSC advises consumers not to use the off-road vehicles until repaired
WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC), in cooperation with Yamaha Motor Corp. U.S.A., of Cypress, Calif., is announcing a free repair program to address safety issues with all Rhino 450, 660, and 700 model off-highway recreational vehicles. Yamaha has also agreed to voluntarily suspend sale of these models immediately until repaired. Consumers should immediately stop using these popular recreational vehicles until the repair is installed by a dealer.
CPSC staff has investigated more than 50 incidents involving 46 driver and passenger deaths in these two Rhino models. More than two-thirds of the cases involved rollovers and many involved unbelted occupants. Of the rollover-related deaths and hundreds of reported injuries, some of which were serious, many appear to involve turns at relatively low speeds and on level terrain.
About 120,000 of the 450 and 660 model Rhinos have been distributed nationwide since Fall 2003. Some units have been equipped by Yamaha with half doors and additional passenger handholds, either before or after sale.
Yamaha’s repair includes the installation of a spacer on the rear wheels as well as the removal of the rear anti-sway bar to help reduce the chance of rollover and improve vehicle handling, and continued installation of half doors and additional passenger handholds where these features have not been previously installed to help keep occupants’ arms and legs inside the vehicle during a rollover and reduce injuries. Owners of the affected Rhinos should stop using them and call their dealer to schedule an appointment to have repairs made once they are available and to take advantage of a free helmet offer.
Yamaha is also voluntarily implementing the same repair program and suspension of sale for the Rhino 700 model, in order to ensure customer satisfaction. Consumers should stop riding the 700 model until it is repaired. About 25,000 Rhino 700s are part of this repair program.
Once these repairs have been made to their vehicles, Rhino users should always wear their helmet and seat belt and follow the safety instructions and warnings in the on-product labels, owner’s manuals and other safety materials. The Rhino is only recommended for operators 16 and older with a valid driver’s license. All passengers must be tall enough to place both feet on the floorboard with their back against the seat back.

2009-04-01T00:10:00.000-07:00

Lonestar Racing +4" MTS RZR Suspension
Today I wanted to take a minute to talk about the Lonestar Racing +4" Razor Suspension Kit.

This is one of, if not the best RZR suspension kits on the market.

This is true for a lot of reasons, but let me just name a few:

1.) Lonestar Racing Lifetime Warranty

2.) Made from 100% chromolly and tig welded

3.) Price $1799.00

Lonestar Racing +4" MTS RZR Suspension
Dramatically change the ride of your RZR Lonestar racing MTS +4" Midtravel suspension. 1" rear placement in the back. 12.5" of wheel travel. 4130 Laser cut tabs and plates. 4130 tubing. Tig welded. Extended brake lines included. The kit comes with the arms, brake lines, tie-rod extenders, axles for use with stock CV's and hardware. This kit is compatible with all stock wheels and body panels. Some fender trimming may be required depending on size of tires. It does use the stock ball joints and pivot hardware you already have. (Ball joints sold separately if needed.) This suspension kit is designed to work with stock length shocks that are valved and sprung specifically for this kit.

Click For More Info On: Lonestar Racing +4" MTS RZR Suspension

2008-11-21T14:32:00.000-08:00

New On board Video Cameras!!